Model C: Connected CO2 sensor with integrated battery and storage

No Wi-Fi? No problem! Our sensor stores your vital measurements internally, ensuring nothing is missed when Wi-Fi is temporarily unavailable or deactivated. When the connection is restored, watch your data effortlessly sync with our cloud portal.

And here's the best part – enjoy complimentary access to our cloud portal for up to 10 sensors under the same account, putting the control and insights at your fingertips. Breathe easier, live smarter!

Features

• CO2 via dual-beam NDIR (Sensirion SCD-30)
• Records CO2 level, temperature, and humidity
• E-ink screen
• Wi-Fi connectivity (2.4GHz only at this time)
• Over 39 hours of battery operation (with Wi-Fi disabled)
• Configurable CO2 level alert threshold with alerts via e-mail and/or audible sound
• Screen refresh period and sample interval configurable via the cloud portal
• 48 months of data retention on the cloud portal
• Ability to update the firmware when available
• Charging via USB-C port (CAN/US, EU or AUS/NZ available as options)
• Optional desk stand and/or wall mount
• Free cloud access is available for up to 10 sensors under a single account.
  • Additional sensors beyond this limit will incur a charge of $5 CAD per sensor per month on a monthly plan, or $50 CAD per sensor per year on an annual plan, plus applicable taxes.

Specifications

Availability

We are stocking low quantities for fast deliveries. If we are out of stock, your order will be built, assembled and tested and will ship 3 to 5 business days from the day you place your order.

Documents

Quick setup guide

Upgrade your sensor to version 2

You are the proud owner of a version 1 Model C sensor and would like to upgrade to version 2 ? It is possible.

For a low price of 75$CAD (plus taxes and shipping) we will upgrade your sensor to a version 2. Simply write to us using the contact form to start the process.

You will be required to send us your sensor, upon receiving it we will use its part to build a version 2 sensor with it and ship it back to you. We aim to upgrade your sensor within 2 business days upon receiving it.

Firmware Changelog

• v1.13.2 - December 8th, 2023
  • Fix issue where the sensor springs back to life ~2.45h after being powered off from the menu
• v1.13.1 - November 15th, 2023
  • Fine-tune v2 temperature and humidity readings
  • Make sure that RFA value never goes negative
  • Fix to make pre-ship/factory calibration easier
• v1.13.0 - September 5th, 2023
  • Add support for v2 hardware
  • Allow custom CO2 calibration values from any network
  • Easier way to switch SSID
• v1.12.0 - February 6th, 2023
  • Change storage indicator to show percent value
  • Fix boot lockup issue that required a physical reset
  • Increase the samples recorded in memory when Wi-Fi is disabled
• v1.10.0 - November 13th, 2022
  • Better handling when configured Wi-Fi network is not available
  • Better boot process screen feedback
  • Add support to disable low limit of CO2 from the cloud portal
• v1.9.0 - August 30th, 2022
  • Fix value update when in "every X minutes" mode
  • Stop sensor measurements when shutting down to avoid battery drain
• v1.8.1 - July 7th, 2022
  • Fix issue where, when Wi-Fi is disabled, the sensor tries to send its recorded readings anyway
• v1.8.0 - July 7th, 2022
  • Add manual date time configuration
  • Add ability to change the sensor data acquisition rate and method
  • Fix issue where changing from C to F or back makes the sensor go in a reboot loop
  • Fix issue where changing the sample rate twice leads to sensor not sending data